Author Topic: Rear Lockers  (Read 217 times)

John Middleton

  • Newbie
  • *
  • Posts: 4
    • View Profile
Rear Lockers
« on: April 10, 2022, 04:56:16 PM »
Hi.  Has anyone any ideas as to how best to secure the rear lockers. My boat will be on a drying mooring in a rather accessible to the general public harbour.  Thanks. John. WB87.

David Bone

  • Newbie
  • *
  • Posts: 41
  • Retired Seafarer
    • View Profile
Re: Rear Lockers
« Reply #1 on: April 13, 2022, 09:50:31 PM »
Hello John,
The rear locker lids on WB107 are secured by a length of 10mm stainless steel rod passing forward to aft through holes drilled in the lid ends and in the locker coaming. A stop washer is welded at one end and a hole drilled in the other to take a small padlock. On the underside of the lid a length of pipe is fastened to guide the rod. (Instead of pipe a couple of fairleads would probably do.

John Middleton

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Rear Lockers
« Reply #2 on: April 14, 2022, 06:20:42 PM »
Hi Dave.  Thank you for the info.  John.