The Winklebrig Forum

About the boat => The Rig => Topic started by: VROUW KIRSTEN on April 22, 2022, 08:10:09 AM

Title: Reinforcement of the mast base
Post by: VROUW KIRSTEN on April 22, 2022, 08:10:09 AM

When setting up the mast, there was always chipping at the edges at the base of the mast due to slight canting. This problem has now been eliminated by two bronze plates attached to the sides.

Title: Re: Reinforcement of the mast base
Post by: John Burton on April 22, 2022, 06:18:21 PM

A very neat solution!