Hi Folks,
Does any one have the measurements for the 3 cut out rear cradle for the boom, think it is also used for transporting, or to rest the boom to either Centre, Port or starboard,, It is basically 2 poles that come up from the transom and is bridged over the engine/rear lockers has 3 U shaped cut outs to hold the Mast when down the boom and gaff, would be so helpful as I'm not near the boat at the moment, Thanks In Advance for any help. Rod
Hi Rod, I hope this photo helps, fortunately mine was at home so was easy to photo. If you need more detailed measurements please let me know, I will be at the boat tomorrow.
All the best
John