Tim Willey
Username: Tim_willey
Registered: 03-2012
Posted on Wednesday, September 04, 2013 - 11:58 am:
It seems that at least half of the rollers on my Indespension cradle have partially seized to the point where the spindles will have to be sawn off to release the roller. The rollers seem fine but not much luck finding replacement spindles. Anyone had experience of this?
Martin_cartwright
Username: Martin_cartwright
Registered: 04-2008
Posted on Thursday, September 19, 2013 - 01:19 pm:
Yes. I had the same thing. The rollers will last forever and the brackets were fine, so I replaced the rusted iron spindles with stainless steel bar held on with a flange at one end and a split pin at the other.
Martin_cartwright
Username: Martin_cartwright
Registered: 04-2008
Posted on Friday, September 20, 2013 - 09:27 am:
Here is a photo of the above.